SWZ400/9,SWZ700/9 CNC Beam Drilling Machine

SWZ400/9,Website:http://www.supertimecncmachines.com,SWZ700/9 CNC beam drilling machineEquipment use:This machine is mainly used for drilling in H type steel, channel steel, square tube, widely used in buildings, bridges, garage and grid industry. Machine adopts three point axis CNC control, a detection method of CNC axis and three were by frequency conversion stepless speed of drill cutting spindle, PLC control, has the characteristics of high precision, and easy operation. Therefore, it is steel structure manufacturing industry to ensure the quality of essential for efficient equipment.Machine tool structure and configuration:1.The machine bed, CNC sliding, drilling cutting spindle box, side clamping device, feeding mechanism, CNC band sawing machine G4240/60, mist cooling, hydraulic system, CNC system, scrap car etc. several parts composition.2.The machine adopts fixed bed, moving workpiece structure, the bed is is welded by the steel plate of sufficient strength, the structure of three-dimensional drill is suitable for medium and small H type steel or channel processing, is suitable for continuous production, degree of automation.3.The machine consists of 3 CNC sliding, respectively is the fixed side CNC sliding moving side CNC sliding and CNC sliding unit. The three slide are similar in structure, comprises a sliding plate and a sliding seat and a servo drive system.4.Machine consists of four axis NC, each slide for a CNC axes, namely side is fixed and mobile sideslip and their respective under moving direction of axis, unit horizontal slipway are moving in the direction of the axis, each axis are used precision linear rolling guide, AC servo motor + ball screw drive, can ensure the positioning accuracy. The workpiece is sent to fourth NC axes, and the roller feed is used to ensure the accuracy of the longitudinal position of the drill hole. In the vertical direction, there is an upper and lower direction of the main engine inlet and outlet pressing device, to ensure the stability of the workpiece in the process of drilling.Specifications：NameUnitSWZ400/9SWZ700/9Workpiece parametersMax widthmm400700Minimum widthmm8080Maximum heightmm400400Minimum heightmm5050Maximum lengthmm90009000Maximum weightkg50007000spindleSpindle numberpcs3X33X3Each spindle speed ranger/min180~560180~560Axial feed ratemm/min20~30020~300Spindle feed travelmm110/240110/240Borehole diameter rangemm≤￠36≤￠36Spindle powerkW5.55.5Taper shank formMorse taper STANDARDSTANDARDMorse taper 4#4#Workpiece clampHorizontal clamping forcekN15.715.7Vertical clamping forcekN6.46.4Motor powerFeed materialkW1x4.01x4.0SpindlekW3x5.53x5.5Upper unit X axiskW1x1.51x1.5Left cell Z axiskW1x1.51x1.5Right cell Z axiskW1x1.51x1.5Hydraulic systemkW1x111x11